Marking Tools and Laser Marking Machines for Marking on Metals
September 21, 2008
Marking tools are used for marking metals and non-metal surfaces. Mark can be a company logo designed with alphabets, numeric pattern or any graphical shape. It distinguishes one company from others. Marking also keeps you ahead of your competitors. Customers usually recognize companies with their logo or mark. Marking is the quick and easy way of identification among other products.
Marking is made easy with marking tools like marking stamps, blocks, punches and dies. The marking tool like stencil, engraving tool, stamping tool and embossing tool creates permanent neat, clear and precise marking. Marking tools have a capability of giving high definition graphically and permanent marking on metals like zinc, steel as well as non-metals like plastics, that are hard to fade out and eye pleasing at the same time. We have a wide variety of machine tools and hand tools. Tools can be made as per your requirment.
Laser marking system is a new form of marking systems. Laser systems are now used worldwide for many industrial applications including cutting, marking, stamping, embossing and engraving. Through laser marking very precise marks can be made. Computer aided laser marking system uses special system software. Its quite sofisticated. Results are far more better than conventional marking. Marking through latest marking machines is now made simple.
Why Do You Need to Have Your Tools Blade Sharpen After Work
September 18, 2008
If you like to do wood carving or making sculpture as your hobby, you surely need tools to make your creation. If you just starting this hobby, knowing your tools and how to treat your carving tools probably the best way to make everything easier for you, thus make efficient time when doing your work.
Let’s start by knowing more about these carving tools. The easiest part is the handle which mostly made of wood or plastic. It has two primary configuration blades in different shape which are very sharp. There are flat chisel types, or curved in cross-section for use as gouges. A flat chisel for carving has two bevels and each side looks the same. A gouge has a concave surface and a convex one. The concave side is known as the inside or channel of the gouge. The convex surface is the outside or back. The tang is a smaller portion of the steel that is fixed inside the handle. Some pull apart easily, others don’t.
Be Your Own Way, but Still Use the Safe Tools
September 16, 2008
It is so often that people are not aware with the tools they use when doing their home improvement. Sometimes they use wrong tools just because they want something quick to be done. Well, you must change that attitude. You have to understand that by using the correct tool it can avoid you from hurting and damaging the project you are trying to repair. Well, it sure does. Don’t think you know everything about tools before you really search for tools information.
Let’s start by some small items which mostly used to repair your broken equipment, for example, screwdriver. Using the right size and head of screwdriver is very important. Do you know why? That’s because if you are using the correct one, then the screw will be easier to remove, and secondly, because if you use the incorrect one, then you can strip the screw which will make it impossible to remove.
Leather Work Tips
September 13, 2008
For leather work, consider the basics: an awl and spare point, a retractable X-acto knife and spare blades, a retractable knife with a break-off blade and a rotary punch. In addition, you’ll need needles, a lump of beeswax and some waxed linen thread.
As well, a pair of pliers to pull the needle through the leather is a must, and scissors you can use for cutting the leather. Then there are edge slickers and bevellers that are used to finish the edges, drive punches for bigger holes and thong cutters for making laces. A T-square, compass and yardstick are essential to ensure that your leather work is measured accurately.
If you’re just starting out with leather work, you might not want to spend a lot of money on tools. Once you’ve worked with the basic set and completed a few projects, you’ll have a better idea of what tools work best and what you use most. At that point, a little research and some comparative shopping can lead you to acquiring some better quality tools that will enhance your leather work.
Why You Should Race RC Cars, and Not Just Bash
September 11, 2008
For those of you who have been racing your RC cars for years, and have a friend or two who you have been trying to get out to the RC tracks, this article is for you. Feel free to forward it to them.
For those of you who are fanatical bashers, and have avoided racing your rc cars at the local track, hear me out, because I have 5 great reasons you should take a run at it.
1) Hanging out with other RC car enthusiasts- You will absorb new ideas on how to keep your RC cars running at peak performance, just by hangin’ out in the pits. Not all of them will be good, some could even do more harm than good. but if you are careful who you listen to, you can learn some terrific stuff that will make your ride handle better, run faster, and be more durable.
2) The game within the game- Its not just about racing, and being first in the heats (altho, that is a huge thrill) but its also about pushing the limits of your RC cars, and fighting agianst the track itself in a measureable way. When your bashing, you don’t really get a precise way of knowing how fast your vehicle is. When you race, you will actually know to the millisecond what your vehicle, limited by your driving skills, can do.
Blown Glass: They Do Still Make It Like They Used To
September 10, 2008
Blown art glass is quickly becoming one of the fastest growing hobbies in North America… and it is about time. Glassblowing has been around since 27 BC in Syria, though the first evidence of manmade glass products occurs in Mesopotamia in the late 3rd century BC. But the advancement of actual “blowing” glass using a tube transformed the materials usefulness. The new technique quickly spread throughout the Roman world.
Harvey Littleton, a ceramics professor, and Dominick Labino, a chemist and engineer, are credited with starting the most recent “studio glass movement” in 1962. The two held workshops at the Toledo Museum of Art. This is where the current method of melting glass in a furnace for use in blown glass art was originated. Thus, Littleton and Labino are credited with making molten glass available to artists in private studios.
The actual process of preparing the glass for blowing is very involved though. The glass is melted in furnaces using the sand, limestone, soda, potash and other compounds. The actual transformation of raw materials into glass takes place well above 2000 degrees Fahrenheit.
Gold Jewelry Hallmarking Secrets Revealed
September 7, 2008
We should be familiar with the BASIC hallmarks mentioned on the website. It might pay you to read them again, just to bring you up to speed and ensure you have grasped the principles. If you have not yet had the chance to read them please go to the website listed below.
Let’s quickly remind ourselves where we should be regarding Hallmarks.
The first three marks mentioned before were:
1: The Makers mark
2: The Assay Office mark
3: The Quality mark
And that brings us to the last mark…
4: The Date stamp.
Please note that more mistakes are made with this mark than any other.
This is caused by two reasons.
The first: because 26 letters can only be used for 26 years (a different one for each year, although they did use italics or capitals for a change). So in order to extend their use, they changed the shape of the stamp mark itself.
One series of 26 years may use a Shield shape, while the next 26 years may use a square shape with the corners trimmed off. Go figure?
Jewelry Insurance - Hints and Tips So You Dont Get Ripped Off
September 5, 2008
As crime and drug use increases, the risks involved in having Antique and Estate Jewelry just lying around your home seem to treble. It becomes a nightmare and you find you are just not sure what to do.
Here are some timely pieces of advice, but by no means comprehensive. If you have special circumstances, it may pay you to go one step further and get some professional advice.
BALANCE AND COMMON SENSE…
If you collect Antique Jewelry and your collection has grown to more than ‘Just a couple of Rings’ you will have a double edged sword to handle.
In the first place you have two problems.
* You are an active buyer, so people know who you are.
* Insurance has put ‘Premiums’ through the roof.
Personally, we just Hate to see items collected and never worn. Jewelry was made to adorn, so if you can, wear them.
But remember this is an open advert to the whole world that you have ‘Got some Jewelry’ at Home. It pays to be just a little aware!
YOUR INSURANCE POLICY…
Jewelry and the Art of Selling
September 3, 2008
Two of the most frequently asked questions we get at the Online Jewelry Appraisal Center is:
“How do I sell an item of Antique or Estate Jewelry?” or… “How much should I ask for it?”
Very often people receive an item as a ‘Hand Down’ or ‘Bequest’ after someone has passed away. It may or may not be worth something, or the person ‘Just doesn’t like it’….
So what to do?
# RULE 1: Take back control.
The Antique Trade in general are a Fine and Trusting lot, but there are always the ‘Shyster’ or ‘Fagin’ characters out there.
In this case it’s not Buyer Beware, but Seller Beware…
Sometimes the Second-Hand Dealers or Pawn Brokers (all of whom have a great general knowledge on Buying and Selling) may not QUITE know what your particular item is really worth.
So the first thing to do is get your item appraised and valued by a qualified gemologist (if there are gemstones involved) and/or a member of the local Valuers association. Your local, TRUSTED Jeweler might be both.
It is greatly suggested that the person you obtain a valuation from, is NOT INVOLVED IN THE PURCHASE OF THE ITEM.
Security Advice for Gold Jewelry, Diamonds, and Gemstones
September 1, 2008
For you to enjoy your treasures, they need to be somewhere close and accessible, but NOT in the Bedside Jewelry Box.
Although we DO advise a Jewelry Box on the Dresser and easily seen, BUT ONE CONTAINING SEVERAL PIECES OF JUNK JEWELRY. It is a well documented fact that Burglars nearly ALWAYS check the Bedroom First knowing that people hide things there.
In general terms we have discovered, through HUGE amounts of research, (Please don’t write and ask us how we know such things) that your average Crim or Thug, doesn’t know the difference between Gold or Plated items, Diamonds or Shiny pebbles of Glass.
In the dimly lit beam of a torch, a handful of Jewelry, stuffed into a pocket, stops them searching any further, and they leave without any more damage.
If it looks like gold, it must be gold… Right?
Well, NO! But this can work in OUR Favor.
So OCCASIONALLY buy that antique looking string of pearls (which we know are glass beads) from the local Op shop or Charity Church Bazaar, and salt it into your ‘attractive’ Junk items in the Jewelry Box on the Dresser.
